If the screw is visible remove it or if not, remove the cap of the handle and then remove the screw. Maybe your kitchen faucet handle has any screws or not. Now carefully disassemble the faucet handle.Cover the drain with a cloth to prevent from falling any faucet part into it.Turn on the handle and let the residual water drains out.It will save from having water gushing all over the kitchen floor. Shutting the water off is always our first priority before starting any plumbing work. Use a sealant to plug the drip of the faucet. Sometimes, we don’t have time to replace the part, so you can try a quick fix. Once you’ve identified the cause of the leak or drip, it becomes easy to fix the repair. But above we have already discussed reasons for a dripping faucet after the water is turned off. You need to inspect them one by one to find out the reason for the leak. There are so many tiny parts in the faucet. Check the Hoses and Sealsįixing a leaky faucet is tricky if you are doing it for the first time. You may need to remove the handle and stem to clean the drain valve. To clean the drain valve, use a toothpick or small screwdriver to dislodge any debris from the valve. Sometimes, the flap stuck in the wrong position or becomes clogged. A drain valve controls the water flow by opening and closing the valve. Check the Faucet’s Drain ValveĪ faucet’s drain valve is another reason for the dripping faucet. It’s a quick and easy thing to check and solve. With time it clogged with debris and the result is dripping water from the kitchen faucet after the water is turned off. The air gap is a device that is used to prevent contaminants from getting into the faucet water. Check the Air GapĪnother common cause of a leaking faucet is a damaged air gap. Remove the stem by removing its retaining nut and now replace the washer. Remove the handle nut using a screwdriver and remove the handle. The washer stretches out over time, it will allow water to drip out from the faucet. If water is dripping around the faucet handle, most probably it is due to the washer. High water pressure also ruptures the washer. A broken washer will cause a drip or leak. With time, the washer gets worn or broken. Its main work is to prevent any leakage or drip from the faucet. The washer sits behind the faucet handle. The damaged washer is a common reason for the faucet dripping after the water is turned off. If you are troubleshooting the dripping faucet issue, you can easily check the shaft seal. It works as a seal and prevents water from dripping around the faucet. It is used in the faucet to seal the gap between the faucet and the sink. The faucet shaft seal is a rubber seal that sits behind the faucet. Remove the old O-ring and replace it with a new one. Loose stem by removing its retaining nut. To replace the O-ring, you need to first turn off the water supply of the faucet. People use harsh chemicals to clean the kitchen sink faucet. The hard plastic will be cracked with time and cause a leak. Over time, the O-rings material can become hard. There are several reasons for damaged O-rings. If the O-ring is worn out or broken, it will not stop water from leaking around the stem. It is found between the faucet handle and the stem.
0 Comments
Leave a Reply. |